Contact Us

TEL: +86-312-8063555 

         +86-20-8705 8565 (Guangzhou Office)
 Ph: +86 13392231161 Ms Bonnie
Address: Donglv Village, Donglv Town, Qingyuan District, Baoding City, Hebei, China

Home > Exhibition > Content
Operation and maintenance of crane during running-in period
Jan 10, 2018

1. Because the crane is a special vehicle, operators should be trained and instructed by the manufacturer, and have a good understanding of the structure and performance of the machine, and obtain certain operation and maintenance experience before the machine can be operated. The manufacturer provides the product use maintenance manual, is the operator to operate the equipment the essential information, in the operation machine, must first read uses the maintenance manual, according to the specification request carries on the operation, the maintenance.

2. Attention to the running-in period of work load, the running-in period of the workload generally do not exceed the rated workload of 80%, and to arrange the appropriate workload, to prevent the machine for a long time continuous operation caused by overheating phenomenon occurred.

3. Pay attention to constantly observe the instrument instructions, abnormal, should be stopped in time to eliminate, in the reason did not find, the failure has not been excluded, should stop the operation.

4. Pay attention to regularly check lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) and quality, and pay attention to check the seal of the machine. Inspection found that the lack of excessive oil and water, should analyze the reasons. At the same time, we should strengthen the lubrication of various lubrication points, it is recommended that in the Running-in period, each class must add grease lubrication point (except special requirements).

5. Keep the machine clean, timely adjustment, fastening loose parts, in case of loosening and aggravating parts wear or loss of parts.

6. The running-in period is over, the machine should be forced to maintain, check and adjust the work, and pay attention to the replacement of oil.

Previous: No Information

Next: Use and maintenance of cranes