Contact Us

TEL: +86-312-8063555 

         +86-20-8705 8565 (Guangzhou Office)
 Ph: +86 13392231161 Ms Bonnie
E-mail: lnd-lifting@hotmail.com
Address: Donglv Village, Donglv Town, Qingyuan District, Baoding City, Hebei, China
 

Small Hydraulic Cylinder Jack

Small Hydraulic Cylinder Jack The following is the size specification of 30T/50T/100T small hydraulic cylinder jack. This is a multi-section mini hydraulic jack. This jack is widely applicable to electric power, chemical industry, steel, bridge, machinery and other industries, and exerts its...

The following are the dimensions of the 30T / 50T / 100T small hydraulic cylinder jack. This is a multi-section mini hydraulic jack.

The jack is widely used in electric power, chemical, steel, bridge, machinery and other industries, and exerts its unlimited power.

Sometimes the jack is used with a hydraulic hand pump or a hydraulic foot pump.

Technical Parameter:

Item No.

RMC-301L

Output T

30

Stroke MM

53

Effective Area CM

33.1

Oil Capacity L

0.058

Height of Product MM

63

Extended Height MM

118

Outside Diameter ₵ MM

115*95

Bore Diameter ₵ MM

75

Plunger Diameter ₵ MM

63

Weight KG

4.2

The advantage:

1.Baked enamel finish for increased corrosion resistance

2.Dust-band reduces contamination, extending cylinder life.

3.The hydraulic jack has two holes on the surface of the oil cylinder for fixed use.

4.Plunger of the jack has the function of retracting automatically.

Precaution:

1. When the hydraulic jack is jacking, the hydraulic jack of the appropriate tonnage should be selected. The bearing capacity should not be overloaded. The bearing capacity of the hydraulic jack should be greater than 1.2 times the weight of the weight. The minimum height of the hydraulic jack is suitable. The minimum height of the hydraulic jack should be compatible with the clearance at the bottom of the weight. When the cushion supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the thickness of the sleeper and the deformation of the sleepers.

2. If multiple hydraulic jacks are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the rated lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment.

3. Hydraulic jacks should be wiped clean before use, and should check whether the components are flexible and damaged. Do not remove the quick connectors when there is load to avoid accidents and damage to components.

4. The hydraulic jack should be placed flat before use, can not be tilted, and the bottom should be leveled to prevent the hydraulic jack from tilting or tipping over the ground due to the subsidence of the ground or the load offset. It can be enlarged by the tough pillow or steel plate at the bottom of the hydraulic jack. Pressure-bearing area to avoid accidents caused by falling or sliding; do not use oily wood or steel plate as a gasket to prevent slipping during stress and cause a safety accident; the weight must be lifted to a safe and solid position. Anti-damage equipment.

Hot Tags: small hydraulic cylinder jack, China, suppliers, manufacturers, factory, price, for sale
Inquiry